updated

srv/fai/config/scripts/CENTOS/40-install-grub

@@ -37,9 +37,17 @@ fi
 mount -o bind /dev $target/dev
 
 
+cat > $target/etc/default/grub <<-EOF
+GRUB_TIMEOUT=5
+GRUB_DEFAULT=saved
+GRUB_DISABLE_SUBMENU=true
+GRUB_TERMINAL_OUTPUT="console"
+GRUB_CMDLINE_LINUX="crashkernel=auto net.ifnames=0 console=tty0 console=ttyS0,115200"
+GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no"
+GRUB_DISABLE_RECOVERY="true"
+EOF
 
 if [ -f $target/usr/sbin/grub2-install ]; then
-
     # CentOS 7
     $ROOTCMD grub2-install --no-floppy "$BOOT_DEVICE"
     $ROOTCMD grub2-mkconfig --output=/boot/grub2/grub.cfg

srv/fai/config/scripts/CENTOS/60-network-scripts

@@ -9,25 +9,37 @@ error=0 ; trap "error=$((error|1))" ERR
 if [ $FAI_ACTION != "softupdate" ]
 then
 	ainsl -v /etc/sysconfig/network "^GATEWAY=$GATEWAYS_1\$"
-	[ -n "$IPADDR" ] && cat > $target/etc/sysconfig/network-scripts/ifcfg-eth0 <<-EOF
+	[ -n "$IPADDR" ] && cat > $target/etc/sysconfig/network-scripts/ifcfg-$NIC1 <<-EOF
 		# generated by FAI
-		DEVICE=eth0
+		DEVICE=$NIC1
 		BOOTPROTO=static
 		ONBOOT=yes
-		HWADDR=`ip l sh dev eth0 | tail -1 | cut -d" " -f6`
+		HWADDR=`ip l sh dev $NIC1 | tail -1 | cut -d" " -f6`
 		IPADDR=$IPADDR
 		NETMASK=$NETMASK
-		GATEWAY=$GATEWAYS
 	EOF
     # Kudzu for some reason won't write eth0 into /etc/sysconfig/hwconf
     # from within the chroot. The following hack puts it in there
     # so that Kudzu doesn't overwrite our config on first boot.
     if [ -f $target/sbin/kudzu ]; then
-	grep eth0 $target/etc/sysconfig/hwconf || $ROOTCMD kudzu -c NETWORK -p \
+	grep eth1 $target/etc/sysconfig/hwconf || $ROOTCMD kudzu -c NETWORK -p \
         >> $target/etc/sysconfig/hwconf
     fi
 fi
 
+# Add service network interface
+if [ -f $FAI/svc-interface ]
+then
+    echo "Add service interface"
+    # Get NIC name
+    SVC_NIC=$(grep '^DEVICE=' $FAI/svc-interface|cut -d'=' -f2)
+    cp $FAI/svc-interface $target/etc/sysconfig/network-scripts/ifcfg-$SVC_NIC
+else
+    echo "No svc-interface. So set gateway on NIC1."
+    echo "GATEWAY=$GATEWAYS" >> $target/etc/sysconfig/network-scripts/ifcfg-$NIC1
+fi
+
+
 # Set hostname
 [ -n "$HOSTNAME" ] && echo $HOSTNAME > $target/etc/hostname
 

srv/fai/config/scripts/DEBIAN/30-interface

@@ -2,17 +2,18 @@
 
 error=0; trap 'error=$(($?>$error?$?:$error))' ERR # save maximum error code
 
-if ifclass DHCPC && [ $FAI_ACTION = "install" -o $FAI_ACTION = "dirinstall" ]
-then
-    cat > $target/etc/network/interfaces <<-EOF
-	# generated by FAI
-	auto lo $NIC1
-	iface lo inet loopback
-	iface $NIC1 inet dhcp
-EOF
-elif [ $FAI_ACTION = "install" -o $FAI_ACTION = "dirinstall" ]
-then
-      [ -n "$IPADDR" ] && cat > $target/etc/network/interfaces <<-EOF
+#if ifclass DHCPC && [ $FAI_ACTION = "install" -o $FAI_ACTION = "dirinstall" ]
+#then
+#    cat > $target/etc/network/interfaces <<-EOF
+#	# generated by FAI
+#	auto lo $NIC1
+#	iface lo inet loopback
+#	iface $NIC1 inet dhcp
+#EOF
+#elif [ $FAI_ACTION = "install" -o $FAI_ACTION = "dirinstall" ]
+#then
+# PXE network config.
+    [ -n "$IPADDR" ] && cat > $target/etc/network/interfaces <<-EOF
 	# generated by FAI
 	auto lo $NIC1
 	iface lo inet loopback
@@ -20,12 +21,21 @@ then
 	  address $IPADDR
 	  netmask $NETMASK
 	  broadcast $BROADCAST
-	  gateway $GATEWAYS
 EOF
     [ -n "$NETWORK" ] && echo "localnet $NETWORK" > $target/etc/networks
     if [ ! -L $target/etc/resolv.conf -a -e /etc/resolv.conf ]; then
 	cp -p /etc/resolv.conf $target/etc
     fi
+#fi
+
+# Add service network interface (fixed to 'eth1' for now)
+if [ -f $FAI/svc-interface ]
+then
+    echo "Add service interface"
+    cat $FAI/svc-interface >> $target/etc/network/interfaces 
+else
+    echo "No svc-interface. So set gateway on NIC1."
+    echo "  gateway $GATEWAY" >> $target/etc/network/interfaces
 fi
 
 # here fcopy is mostly used, when installing a client for running in a

srv/fai/config/scripts/PORCH/10-sshkey

@@ -11,7 +11,7 @@ error=0; trap 'error=$(($?>$error?$?:$error))' ERR # save maximum error code
 if [ -f $FAI/pubkeys/authorized_keys ]
 then
   # lock the root password
-  $ROOTCMD usermod -L root
+  #$ROOTCMD usermod -L root
   mkdir -p $target/root/.ssh && chmod 700 $target/root/.ssh
   cat $FAI/pubkeys/authorized_keys > $target/root/.ssh/authorized_keys
   chmod 600 $target/root/.ssh/authorized_keys